Stained Boards

For the older period property

These new products are produced on our new UV lacquer line and so at Billinghay Sawmill we now control all aspects of the production of our flooring from air drying the wood – kilning – machining and finishing the product so unusually you can buy your floor which is genuinely made in England.

The UV lacquer is extremely hard wearing and the final coat leaves a silk matt finish to bring the timber to life but not to appear as a shiny plastic coating on the wood.  We can offer a bespoke service to larger projects in respect to machining and finishing.  The finishes you see can be reproduced on oak engineered flooring with very similar results and therefore all these products could be used over underfloor heating.

Tudor Oak
This is a stained 20mm two tone oak board in 175mm width.  Pre finished with 6 coats of UV lacquer to give a warm dark matt finish.

Sizes Code Oak Tudor 175x20 ?

Tudor Oak

Pewter Oak
This finish is a unique colour with a dark silvered and aged look.  It is pre finished with 6 coats of UV lacquer and is available in 150mm width.  This treatment does not leave the timber with a monotone finish but reacts to each board individually to give a more natural aged and coloured look.  This floor would look exceptional in a large minimalist type development or alternatively could be used to complement a gothic themed property.

Sizes Code Oak Pewter 150 ?

Pewter Oak